Honeywell Experion Orion Console Installation Manual page 31

Check
Check that the
alarm light is
displaying the
startup color
pattern, and both
on both sides of
the alarm light
panel.
Open the
equipment tray
and check that the
interior light
illuminates.
On the sides of the
equipment tray,
check that the
Honeywell logo
illuminates.
Check that the
monitors turn on.
Details
The safety pressure tape cable is threaded from the
l
underside of the work surface through to the lower raceway
and is connected to the lift control dongle.
The alarm lights display a startup color pattern when the alarm
light controller USB cables are connected to a workstation and
the workstation is powered on.
If the alarm light startup color pattern is not displayed, check
the following:
The power light located on the power strip within the lower
l
raceway is illuminated.
In the slat wall cavity, the alarm light controller cables on
l
both sides of the console are connected.
The workstation that is connected to each alarm light
l
controller USB cable is turned on.
When the equipment tray door is opened, or the removable
covers on the top of the equipment tray are removed, LED
lighting within the equipment tray illuminates. If these lights do
not illuminate, check the following:
The power light located on the power strip within the
l
equipment tray is illuminated.
The switch located on the equipment tray door surround is
l
present and releases when the equipment tray door opens.
The magnetic switches located on the equipment tray
l
openings for the removable covers are present and correctly
aligned.
Check that the power light located on the power strip within the
equipment tray is illuminated.
If the monitors do not turn on, check the following:
The power light located on the power strip within the lower
l
raceway is illuminated.
In the slat wall cavity, check that the power wiring for the slat
l
Chapter 3 - Installing an Experion Orion Console
31