2-7.
Bottom Frame
Note
The following parts are not reusable. Prepare new parts in advance.
• DCP conductive tape (D)
Preparation
1.
Remove the LCD assembly. (Refer to
2.
Remove the front panel assembly. (Refer to
3.
Remove the top/bottom panel assembly. (Refer to
4.
Remove the rear panel assembly. (Refer to
Procedure
1.
Remove the two DCP conductive tape (D).
PMW-50
"2-2. LCD
Assembly")
"2-4. Front Panel Assembly/SxS
"2-3. Top/Bottom Panel
"2-6. Rear Panel
Assembly")
DCP conductive tape (D)
(unreusable)
Lid")
Assembly")
2-11