Front Panel Assembly/Sxs Lid - Sony PMW-50 Service Manual

2-4.

Front Panel Assembly/SxS Lid

Note
The following parts are not reusable. Prepare new parts in advance.
• SxS knob sheet
• SxS lid cushion
Preparation
1. Remove the LCD assembly. (Refer to
2. Remove the top/bottom panel assembly. (Refer to
Procedure
1. Remove the three bosses to detach the front panel assembly.
Holes A
Bosses B
Note
When installing the front panel assembly, fit the three bosses A with the three holes A and two bosses B with the
two holes B.
2. Remove the three screws to detach the SxS shaft retainer and the SxS lid spring plate.
PMW-50
"2-2. LCD Assembly")
"2-3. Top/Bottom Panel
Boss A
Front panel assembly
Assembly")
Bosses A
Holes B
2-7