Table of Contents
Advertisement
2-6.
Rear Panel Assembly
Preparation
1.
Remove the LCD assembly. (Refer to
2.
Remove the top/bottom panel assembly. (Refer to
Procedure
1.
Open the IO cover.
2.
Remove the screw to detach the USB cover.
USB cover
P2 x 5 (black)
IO cover
3.
Remove the two screws to detach the rear panel assembly.
Rear panel assembly
P2 x 5 (black)
4.
Install the removed parts by reversing the steps of removal.
PMW-50
"2-2. LCD
Assembly")
"2-3. Top/Bottom Panel
Assembly")
2-10
Advertisement
Table of Contents
