Dpr Board - Sony PMW-50 Service Manual

2-13.

DPR Board

Preparation
1. Remove the LCD assembly. (Refer to
2. Remove the top/bottom panel assembly. (Refer to
3. Remove the front panel assembly. (Refer to
4. Remove the rear panel assembly. (Refer to
5. Remove the bottom frame. (Refer to
6. Remove the front frame assembly. (Refer to
7. Remove the DCP board. (Refer to
Procedure
1. Remove the two screws to detach the USB bracket.
2. Remove the four screws to detach the heat spreader DPR.
P2 x 4
PMW-50
"2-2. LCD Assembly")
"2-3. Top/Bottom Panel
"2-4. Front Panel Assembly/SxS
"2-6. Rear Panel
"2-7. Bottom Frame")
"2-8. Front Frame
"2-12. DCP Board")
Heat spreader DPR
P2 x 4
USB bracket
Assembly")
Lid")
Assembly")
Assembly")
P2 x 4
2-26