Table of Contents
Advertisement
1-5.
Firmware Upgrade
Upgrade the firmware from a personal computer (PC) through a USB connection. Though the firmware can be upgraded
using an SxS memory card that contains the upgrade data, firmware upgrade using the high-speed stable USB interface
is recommended in this manual.
Preparation
1.
Check the current firmware version indicated in "Version" of the OTHERS menu.
2.
Install the upgrade software in the PC.
Note
For how to obtain the upgrade software, contact your local Sony Sales Office/Service Center.
When a PC is connected to the unit for the first time, driver software need to be installed in the PC. For details,
check the readme file supplied with the upgrade software.
Procedure
1.
Check that the power switch on the unit is turned OFF.
2.
Remove the screw from the rear panel to detach the USB cover.
USB maintenance connector
USB cover
Precision screw
P2 x 5 (black)
3.
Connect the PC to the USB maintenance connector on the unit with a mini USB cable.
4.
Turn ON the power of the unit.
5.
Run the firmware upgrade software on the PC.
6.
After the firmware upgrade is completed, turn OFF the power and disconnect the mini USB cable.
7.
Attach the USB cover with the removed screw.
8.
Turn ON the power and confirm that the firmware version has been upgraded in "Version" of the OTHERS
menu.
PMW-50
1-10
Advertisement
Table of Contents
