Sony PMW-50 Service Manual page 74

ID Diagnosis
0x0a Version matching test (power supply
microcomputer)
0x0b Version matching test (sub-micro-
computer of the inside panel)
0x0c Version matching test (sub-micro-
computer of the handle)
0x0d Version matching test (sub-micro-
computer of the rear panel)
0x0e Version matching test (sub-micro-
computer of the outside panel)
0x0f Version matching test (sub-micro-
computer of the viewfinder)
Item6 (Power block diagnosis)
The power block diagnosis tests the following contents.
ID Diagnosis
0x01 Power switch read
0x02 Battery recognition
0x03 Power supply state
Item9 (Diagnosis between display block and media block)
Diagnosis between the display block and the media block tests the following contents.
ID Diagnosis
0x91 Video signal line communication test
in playback direction
(Direction from MEDIA to DIS-
PLAY)
PMW-50
Error value
-1: Error
-1: Error
-1: Error
-1: Error
-1: Error
-1: Error
Error value
-1: The power switch cannot be read.
-4: Diagnosis is disabled because the
power switch is not set to ON.
-1: Communication with battery is
disabled.
-4: Diagnosis is disabled because no
battery is connected.
-1: Power supply is not controlled
correctly.
-4: Diagnosis is disabled because the
power switch is not set to ON.
Error value
-1: Test pattern check error
Type1/2 Note
1, 2 The unit must have started
and a sub-microcomputer
must be connected.
1, 2 The unit must have started
and a sub-microcomputer
must be connected.
1, 2 The unit must have started
and a sub-microcomputer
must be connected.
1, 2 Normal end "0" is always re-
turned because there is no ap-
plicable device in this unit.
1, 2 Normal end "0" is always re-
turned because there is no ap-
plicable device in this unit.
1, 2 Normal end "0" is always re-
turned because there is no ap-
plicable device in this unit.
Type1/2 Note
1, 2 The power switch must
be set to ON.
1, 2 An appropriate battery
must be connected.
1, 2 The power switch must
be set to ON.
Type1/2 Note
1, 2 —
3-10