Table of Contents
Advertisement
6.
Disconnect the flexible flat cable from the connector CN100 on the SWC-55 board.
Flexible flat cable
CN100
SWC-55 board
7.
Disconnect the fine-wire coaxial cable from the connector CN300 on the SWC-55 board.
8.
Remove the (a) screw to detach the SWC bracket and the SWC-55 board.
9.
Remove the two (b) screws to detach the SWC-55 board.
Fine-wire coaxial cable
SWC-55 board
10. Disconnect the fine-wire coaxal cable from the connector CN100 on the EC-115 board.
PMW-50
P2 x 4
SWC bracket
CN300
(b) P2 x 4
Tape
SxS holder
(a) P2 x 4
2-20
Advertisement
Table of Contents
