Honeywell Galaxy Dimension Series Installer Manual page 73

Galaxy Dimension Installer Manual
MAX Log
3
The Galaxy system has a panel dependent event log for recording the MAX
all readers on the system and operates on a first-in-first-out basis for overwriting events when the log is filled.
To display the events in the MAX
the required MAX 3 address then press the ent key. The first event that occurred on the selected MAX
displayed along with details of the time, date and MAX
To view the log press the A key to move forward in time through the events or the B key to move backwards.
Press the esc key to return to the MicroMAX address display. To view the log of another MAX
or B key to select the required address. To escape from the Access Doors option press the esc key.
MAX Events Print-Out
3
The MAX events can be printed out as they occur to an on-line printer. To print the MAX
3
that option 51.27 = PARAMETERS.On-Line Print is enabled. Select option 51.28 =
PARAMETERS.On-Line Level and enter 2 to print out all system events including the MAX
to print out only the MAX
NOTE: A serial printer must be connected to line one of the Galaxy panel and the printer must remain on-line
(ready to print) at all times.
Downloading the MAX
The MAX /DCM event log can be downloaded to Remote Servicing by using the MAX/DCM Log copy
3
option in Remote Servicing.
log select option 25 = ACCESS DOORS; use the A or B keys to select
3
Time and date
of event
MAX user number
3
events.
3
/ DCM Log
3
Access Control (cont'd)
3
number.
3
02:25 SUN 22 OCT 02:25 SUN 22 OCT 02:25 SUN 22 OCT 02:25 SUN 22 OCT 02:25 SUN 22 OCT
USR032 Valid USR032 Valid
USR032 Valid USR032 Valid USR032 Valid
Event type
5-11
activations. This log is shared by
, use the A
3
events ensure
3
events or 3
3
3 is