Honeywell Galaxy Dimension Series Installer Manual page 291

Galaxy Dimension Installer Manual
KEYPAD TEXT
PA DEL/SL PA Delayed Silent zone activated (opened).
PA DELAY PA Delayed zone activated (opened).
PA RESET PA Reset has occurred.
PA SILENT PA Silent zone activated (opened).
PA UNSET PA Unset zone activated while group in unset condition.
PART SET Part Set of system or Group(s).
PF RESET System has returned to the set status after a power failure.
PREWARN System or Group(s) in the Autoset Prewarning period.
PRINT OC Print On Command.
Print On Line, the automatic printing of the Event Log. Not to be confused with the
PRINT OL
printer on-line message from a printer.
+PRT ENTRY Part Entry zone activated (opened).
–PRT ENTRY Part Entry zone de-activated (closed).
+PRT FINAL Part Final zone activated (opened).
–PRT FINAL Part Final zone de-activated (closed).
+PSU FLT Power Supply Unit fault
PUSH SET Push Set (Exit Terminator) zone activated (opened).
R.TIMESET Remote timeset.
REARM Rearm of system has occurred.
RECEN.SET Recent Set. Alarm occured within 5 minutes of set.
REM ABORT Remote connection timeout.
+REM CALL Remote device connected.
–REM CALL Remote device disconnected.
REM COPY Remote Copy of site details via SIA has occurred.
REM FAIL Remote failure after all retries.
REM FIN Remote connection finished.
REM ID Remote suite ID menu accessed.
REM LOG Remote log menu accessed.
REM MSG Remote message menu accessed.
REM OVRWR Remote Overwrite via SIA has occurred.
REM RESET Remote reset menu accessed.
REM TRY First remote connection attempt logged.
REM WR/RD Diagnostics remote read/write
REMOVED Engineer has Removed a module from the system.
RF BATLOW RF Battery low
RF JAM RF signal jammed
RF MEM! RF RIO Non Volatile Memory failed
RF SUPER RF Supervision failure
NOTE: M = Mandatory. NM = Non-Mandatory
NOTE: A plus (+) means an event has started. A negative (-) means an event has finished.
DESCRIPTION
D-5
Event Log (cont'd)
Trigger Event
1. PA/Duress M
1. PA/Duress M
1. PA/Duress NM
1. PA/Duress M
1. PA/Duress M
10. Setting M
20. Fault NM
None NM
None NM
None NM
2. Intruder NM
2. Intruder
NM
18. Zone restoral
2. Intruder NM
2. Intruder
NM
18. Zone restoral
13. Elec. Status
M
20. Fault
None NM
None NM
10. Setting M
2. Intruder M
None NM
14. menu access NM
14. Menu access NM
None NM
None NM
None NM
None NM
None NM
None NM
None M
None NM
None NM
None M
9. Tamper M
13. Elec. Status
15. Trouble M
20. Fault
15. Trouble
M
20. Fault
9. Tamper M
19. RF Supervision
M
20. Fault