Honeywell Galaxy Dimension Series Installer Manual page 205

Galaxy Dimension Installer Manual
56.3.09 Remote Access
This option defines when and how Remote Servicing will operate. The options are described as follows.
1 = Access Time
This option determines the type of access that is available to the Remote Servicing operator. There are four
modes:
1 = Off:
Galaxy Gold access to the Galaxy panel is disabled
2 = All Unset:
Access only when all the groups are unset. If groups are not enabled access is available at any time.
3 = Any Set:
No access if any of the groups are set. The system must be fully unset, whether groups are enabled or not.
4 = Any Time (default):
Access available at any time
2 = Mode
1 = Direct
This permits access to be initiated from Remote Servicing.
2 = Manager Authorize
If this option is selected here are two methods that an authorized user can use to enable access to the Galaxy
via Remote Servicing:
Timed Access:
Remote Servicing must access the Galaxy within 40 minutes of this option being enabled by the manager.
Once connected, there is no time limit on the access period. On terminating the connection, Remote Serv-
icing can re-access the system within a 15 minute period of the termination.
Call Back:
The manager instructs the Galaxy to initiate a connection to a PC (with Remote Servicing software loaded)
by dialling one of the numbers programmed in the Call Back option.
Refer to option 47 = Remote Access for details of how to initiate the Manager authorized connection.
56 - Communications (cont'd)
6-131