Honeywell Galaxy Dimension Series Installer Manual page 104

42 - Codes (cont'd)
Manager Code
The manager is authorized to:
• modify the manager PIN — the manager PIN cannot be deleted — and assign the MAX features
to the code.
If authorized via menu option 48.2 the manager is also authorized to:
• program the User Code options of each of the user codes;
• allocate other codes to the manager type (3.6);
NOTE: The manager PIN can be reset to the default code (12345) by the engineer and remote code using
the Reset Mgr (Manager) parameter (refer to option 51.21).
The manager code defaults to group choice when groups are enabled. The manager is able to toggle
the group choice option on and off (using the
The manager code defaults to accessing the full menu (options 11 – 48). To access the quick menu (options 0
– 9), remove the assigned to the manager in the Modify Level option.
Programming Codes
Each PIN user has access to modify their own PIN. Users do not have access to user codes other than their
own. The only exception to this is the manager code.
42.1 = User Codes
Enter option 42=Codes and select option 1=User Codes. Press the ent key; details of the first user (User
001) are displayed. The following typical information is displayed on the keypad.
User No
User Type
Each of the users can be displayed using the A and B keys, or a specific user can be selected by entering the
required user number, for example 023, 069. When the required code is displayed, press the ent key to select
the user codes modification options; 1=Modify PIN is displayed. The available modification options can be
viewed by pressing the A or B keys; press the ent key to select the required option. The options are detailed
in the following paragraphs:
User Name
0 0 1 0 0 1 User User
0 0 1 0 0 1 0 0 1 User User User
L2.3 L2.3 L2.3 L2.3 L2.3 A 1234 A 1234 A 1234 A 1234 A 1234
Galaxy Dimension Installer Manual
key) as required.
= no pin assigned
= pin assigned
m m m m m
max card/tag/fob assigned
Group mode
6-30