Settings
Parameter
User ID
Password
WEP key
Passphrase
Frequency band
Step 6
Press Save.
Set Up a Wi-Fi Profile
You can configure a Wi-Fi profile from the phone web page or from remote device profile resync and then
associate the profile to the available Wi-Fi networks. You can use this Wi-Fi profile to connect to a Wi-Fi.
You can configure maximum of four profiles.
Description
Allows you to enter a user ID for the network profile.
This field is available when you set the security mode
to Auto, EAP-FAST, PEAP-GTC,
PEAP-MSCHAPV2. This is a mandatory field and it
allows maximum length of 32 alphanumeric
characters.
Allows you to enter password for the network profile
that you create.
This field is available when you set the security mode
to Auto, EAP-FAST, PEAP-GTC,
PEAP-MSCHAPV2. This is a mandatory field and it
allows maximum length of 64 alphanumeric
characters.
Allows you to enter password for the network profile
that you create.
This field is available when you set the security mode
to WEP. This is a mandatory field and it allows
maximum length of 32 alphanumeric characters.
Allows you to enter password for the network profile
that you create. You need to enter this value when the
security mode is PSK.
Allows you to select the wireless signal frequency
band that is used in the WLAN. Options are:
• Auto
• 2.4 GHz
• 5 GHz
Default: Auto
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
Set Up a Wi-Fi Profile
111