View Wi-Fi Status Messages On The Phone; Device Administration Settings; Change The Time Format - Cisco 6800 Series User Manual

View Wi-Fi Status Messages on the Phone

View Wi-Fi Status Messages on the Phone
You can view messages about the Wi-Fi connection status of your phone. The messages can help you diagnose
Wi-Fi connection problems. The messages contain:
• connection time and MAC address of the AP
• disconnection time and diagnostic code
• connection failure time
• time that weak signal of the AP continues over 12 seconds
• the status of firmware memory when the free memory is less than 50K
• the status of losing AP beacon when the phone can't receive signal from the AP
• the status of no response for Wi-Fi authentication or association requests
• the status of TX failure
• the status of WPS connection failure
Procedure
Step 1
Press Applications
Step 2 Select Status > Wi-Fi messages.
Step 3
Use the outer ring of the navigation cluster to scroll through the messages.
Step 4 Press Details to view more details of the selected message.
Step 5
(Optional) Press Clear to delete all the messages.

Device Administration Settings

You can set some other preferences from the phone in the Device administration menu.

Change the Time Format

You can change the current time format that the phone screen displays.
Procedure
Step 1
Press Applications
Step 2 Select Device administration > Date/Time > Time format.
To set daylight savings, select Device administration > Date/Time > Daylight savings. Select On to turn
on the daylight savings and select Off to turn it off.
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
116
.
.
Settings