Scan And Save A Wi-Fi Network - Cisco 6800 Series User Manual

Settings
c) Click Submit All Changes.

Scan and Save a Wi-Fi Network

You can scan a Wi-Fi profile to get the list of available wireless networks (SSID). The security mode and the
network name have the same value of the scanned SSID. You can then edit the fields of any of the wireless
networks. When you save the changes, it saves as a Wi-Fi profile in the phone Wi-Fi profile list. You can
then use this new Wi-Fi profile to connect the phone to a wireless network.
Note • When the security mode of a wireless network is None, PSK, and WEP, you can't modify the security
• When you scan a wireless network (SSID) which is the current connected wireless, you can't edit the
Procedure
Step 1 Press Applications
Step 2
Select Network configuration > Wi-Fi configuration > Wi-Fi profile.
Step 3 In the Wi-Fi profile screen, press Scan to get all available wireless networks.
Step 4
(Optional) In the Connect to Wi-Fi screen, press Scan again to rescan the list.
Step 5 Select a wireless and press Select or the Select button.
Step 6
In the Setup Wi-Fi screen, set the parameters as mentioned in the Profile Parameters table.
mode. On the Security mode screen, you only see the security mode that is set for the network. For
example, if the security mode of a network is PSK, you see only PSK in the Security mode screen.
Network name of this SSID.
.
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
Scan and Save a Wi-Fi Network
113