Configure The Screen Saver With The Phone Web Interface - Cisco 6800 Series User Manual

Configure the Screen Saver with the Phone Web Interface

Configure the Screen Saver with the Phone Web Interface
You can configure a screen saver for the phone. When the phone is idle for a specified time, it enters screen
saver mode.
Any button press returns the phone to normal mode.
Procedure
Step 1
On the phone web page, select Voice > User.
Step 2 In the Screen section, set up the fields as described in the following table.
Parameter
Screen Saver Enable
Screen Saver Type
Screen Saver Wait
Picture Download URL
Logo URL
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
120
Description
Select Yes to enable a screen saver on the phone.
When the phone is idle for a specified time, it enters
screen saver mode.
Default: No
Types of screen saver. Options you can choose:
• Clock—Displays a digital clock on a plain
background.
• Download Picture—Displays a picture pushed
from the phone webpage.
• Logo: Displays a logo on the phone screen. Add
a logo image in the Logo URL field.
Amount of idle time before screen saver displays.
Enter the number of seconds of idle time to elapse
before the screen saver starts.
Default: 300
URL locating the (.png) file to display on the phone
screen background. If you select picture as as
screensaver type, this image displays as a screensaver
on the phone screen.
When you enter an incorrect URL to download a new
wallpaper, the phone fails to upgrade to the newer
wallpaper and displays the existing downloaded
wallpaper. If the phone does not have any wallpaper
downloaded earlier, it displays a gray screen.
Enter a URL or path for the location where the logo
image is saved. If you select logo as as screensaver
type, this image displays as a screensaver on the phone
screen.
Settings