Adding A Camera; Removing A Camera - Honeywell 30 Series User Manual

Adding a Camera

Go to

4. Click
Figure 6-3 Adding a Camera
5. Click Honeywell or ONVIF to select the camera protocol.
Note
6. Click Add and the camera will be placed at an unoccupied position. You may also expand
the menu on the side of the Add button to select a position number.
7. When a camera is added, it should appear on the graphical placement below.
8. Click Apply after you added cameras.
9. You may click

Removing a Camera

Go to

1. Click and the remove button will turn yellow
ManagementAdd/edit.
and a list of cameras in the same subnet will appear:
30 series cameras that support the Honeywell protocol:
HC30W42R3 HC30W45R3 HC30W45R2 HC30WB2R1 HC30WB5R1
HC30WB5R2 HC30WE2R3 HC30WE5R3 HC30WE5R2 HC30WF5R1
HC60W35R2 HC60W35R4 HC60W45R2 HC60W45R4 HC60WB5R2
HC60WB5R5 HC60WZ2E30
to return to the previous window.
ManagementAdd/edit.
.
Settings
29