Honeywell 30 Series User Manual page 23

•
See
click Skip setup to skip this auto setup.
Note
•
After the hardware is reset, skipping setup is required to ensure the hard
disk is not formatted
3. Click Continue and cameras that have been searched within the LAN will be listed:
Figure 2-6 Device Initialization-Search for Cameras
•
This step will not be stayed for long if the cameras are accessed by
default password.
Note
•
30 series Camera FW version is V19.12.13 or later.
4. Click Continue and the following windows is displayed:
Creating a Volume on page 54
.
to manually create the volume if you
Getting Started
9