Adding A Camera; Figure 6-3 Adding A Camera - Honeywell HN300401 Series User Manual

Adding a Camera

Go to

1. Click and a list of cameras in the same subnet will appear:

Figure 6-3 Adding a Camera

2. Click Honeywell or ONVIF to select the camera protocol.
30/60 series cameras that support the Honeywell protocol:
HC30W42R3 HC30WE2R3 HC30WB2R1 HC30W45R3 HC30WE5R3
HC30W45R2 HC30WB5R2 HC30WE5R2 HC30WF5R1 HC30W25R3
Note
HC60W35R2 HC60W35R4 HC60W45R2 HC60W45R4 HC60WB5R2
HC60WZ2E30 HC60W45R5 HC60W34R2 HC60W34R2L HC60W44R2
HC60WB4R2 HC60WB4R2L HC60WZ5R30 HC60WZ2R36 HC60WZ5E30 HC60WZ5I30
3. Click Add and the camera will be placed at an unoccupied position. You may also expand
the menu on the side of the Add button to select a position number.
When a camera is added, it should appear on the graphical placement below.
4. Click Apply after you added cameras.
5. You can click
Note
You can manually add a camera by using RTSP connection:
ManagementAdd/edit.
to return to the previous window.
When a camera is connected to an NVR, the camera's system time will be
modified the same as the NVR's system time without change for the time
zone.
Settings
HC30WB5R1
HC60WB5R5
HC60W44R2L
31