Cisco 8800 Series Hardware Installation Manual page 46

Install Cable Management and Door Kit on a Chassis
Figure 25: Bottom Cover for 8808 Chassis
Step 5 Secure the bottom cover to the cable management brackets by using four M4 x 6 mm pan-head Phillips screws.
Tighten each screw to 11.5 to 15 in-lb (1.3 to 1.7 N·m) of torque.
Step 6
Before you install the top hood, remove the connector cap from the alarm cable.
Figure 26: Remove Connector Cap
Hardware Installation Guide for Cisco 8800 Series Routers
40
Unpack and Install the Chassis