Cisco 8800 Series Hardware Installation Manual page 15

Prepare for Installation
Note The images in this chapter are only for representational purposes, unless specified otherwise. The chassis'
actual appearance and size may vary.
Warning Statement 1071 Warning Definition
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work
on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard
practices for preventing accidents. Use the statement number provided at the end of each warning to locate
its translation in the translated safety warnings that accompanied this device.
SAVE THESE INSTRUCTIONS
•
•
•
•
•
•
•
•
•
•
•
•
Safety Guidelines
Before you perform any procedure in this document, review the safety guidelines in this section to avoid
injuring yourself or damaging the equipment. The following guidelines are for your safety and to protect the
equipment. Because the guidelines do not include all hazards, be constantly alert.
Safety Guidelines, on page 9
Compliance and Safety Information, on page 10
Laser Safety, on page 10
Energy Hazard, on page 11
Preventing Electrostatic Discharge Damage, on page 11
Cautions and Regulatory Compliance Statements for NEBS, on page 12
Installation Guidelines, on page 12
Procure Tools and Equipment, on page 13
Prepare Your Location , on page 15
Prepare Yourself , on page 16
Prepare Rack for Chassis Installation, on page 16
Clearance Requirements, on page 17
C H A P T E R
Hardware Installation Guide for Cisco 8800 Series Routers
2
9