Table of Contents
Advertisement
Setup Operations
From the Setup Mode, you can configure alarms, 4-20mA, relays, faults, channels, date & time,
network, advance, and security.
1. Go to the Monitoring Mode.
2. Press
or
Menu options is displayed.
3. Press
or
4. Press
to accept and enter the Setup menu.
5. Press
or
to accep it.
6. Optional Step: Press
From the Setup Mode panel, you can review any of the following options:
Option
Alarms
4-20mA
Internal
Midas-M
buttons and hold for one second to enter the Main Menu, and one of the
buttons to scroll to Setup.
to continue exploring more options from the Setup Mode, and then press
to cancel and return one step back.
Operations you can Setup from selected option
Gas type of each channel
l
Correlation factor of each channel if gas type is "USER"
l
Alarm 1 type and level of each channel
l
Alarm 2 type and level of each channel
l
Deadband level of each channel
l
Alarm latching/non-latching of each channel
l
Alarm delay time of each channel
l
Concentration range of 4-20mA output of each channel.
Relay configuration (Instrument Fault Only, Separate Fault Relay,
l
34
User Manual
Advertisement
Table of Contents
