Table of Contents
Advertisement
Set up Gas and Alarm
Set up gas detection and alarm set for each channel.
On the home page, select Set-up>Gas/Alarm.
1. Set the desired channel.
2. Gas: Set the gas you want to detect on each channel. Gas-name and K-factor (weight value
for gas value) can be set only for User-gas.
Note: You cannot set the range.
3. Set the concentration at which Alarm1 occurs.
4. Set the concentration at which Alarm2 occurs.
5. Enter the Dead band.
6. Enter the Alarm delay. When an alarm condition is reached, an alarm occurs at a delayed
time.
7. Set up Latching in an alarm situation.
8. Set the time for calibrating the progress alarm.
9. Click Accept.
Midas-M
48
User Manual
Advertisement
Table of Contents
