Mount The Relay Module - Honeywell Midas-M User Manual

Mount the Relay Module

The Relay Module has an integral mounting bracket assembly that is easily mounted to a
suitable vertical surface such as a wall, tool housing, mounting plate on a pole etc.
1. Pull out the four screws and remove the plate cover.
2. a. Partially screw the fixings into the mounting surface.
b. Place the Relay module over the screws, so they pass through the holes to locate in
the slots.
c. Tighten the screws to fix the Relay Module to the surface.
3. Connect the wire through the cable gland to the terminal block.
4. Place the plate cover in position and screw the four screws you removed in Step 1.
5. Push the mounting bracket assembly horizontally and engage the Relay Module connector.
6. a. Align the screw holes and the slot-boundaries, and tight the machine screws
(3016D0355) provided in packaging.
b. Connect the mounting bracket assembly to the Relay Module.
Midas-M 15 User Manual