Honeywell Notifier NFS2-640/E Programming Manual page 38

Programming
Point Type
3 Output
to
31 Output
32 Not Used
33 Output
34 Output
35 Output
63 Output
64 Not Used
NOTE:
1. Point number to Module number relationship is sequential. To determine Point to Module
relationship add 128 to Point number to arrive at Module number.
2. Point number to Module number relationship is sequential. To determine Point to Module
relationship add 96 to Point number to arrive at Module number.
ACS Selection Group H (SLC #1, Detectors 1-64):
Point
1
2
3
to
64
* Pressing the switch button when the Switch Function is "Not Used" will cause the associated LED to
stop blinking. This is a local acknowledgement at the annunciator only: no message is sent to the panel.
NOTE: Point number to Detector number relationship is sequential; therefore, point 48 is
Detector 048.
38
Table 2.20 ACS Group G (2 of 2)
Red LED
SLC 1, Module 131 Active
to (see note 1)
SLC 1, Module 159 Active
SLC 2, Module 129 Active
SLC 2, Module 130 Active
SLC 2, Module 131 Active
to (see note 2)
SLC 2, Module 159 Active
Table 2.21 ACS Group H
Type Red LED
Input Detector 001 Alarm
Input Detector 002 Alarm
Input Detector 003 Alarm
to (see note)
Input Detector 064 Alarm
Yellow LED
SLC 1, Module 131 Trouble
to (see note 1)
SLC 1, Module 159 Trouble
SLC 2, Module 129 Trouble
SLC 2, Module 130 Trouble
SLC 2, Module 131 Trouble
to (see note 2)
SLC 2, Module 159 Trouble
Yellow LED
Detector 001 Trouble
Detector 002 Trouble
Detector 003 Trouble
to (see note)
Detector 064 Trouble
NFS2-640/E Programming Manual — P/N 52742:L2 7/17/14
Basic Program
Switch Function
Controls SLC 1, Module 131
Controls SLC 1, Module 159
Controls SLC 2, Module 129
Controls SLC 2, Module 130
Controls SLC 2, Module 131
Controls SLC 2, Module 159
Switch Function*
Not Used
Not Used
Not Used
Not Used