Manage The Leds - NETGEAR WAC510 User Manual

Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
• IP address (to receive traps). The IP address of the SNMP manager that must
receive the traps.
• Trap Port. The port number at which the SNMP manager must receive traps. The
default is 162.
7. Click the Apply button.
Your settings are saved.

Manage the LEDs

By default, all LEDs are enabled and function as described in Top panel with LEDs on
page 14. You can manage whether the LEDs light at all. This function is useful if the
access point must function in a dark environment.
To enable or disable the LEDs:
1. Open a web browser from a computer that is connected to the same network as the
access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
If your browser does not open the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 41.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight app or Insight Cloud portal, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight App on an iOS or Android mobile device on page
26).
The Dashboard page displays.
4. Select Management > Configuration > System > Advanced > LED Control.
The LED Control page displays.
5. Select one of the following radio buttons:
• Enable All LEDs. All LEDs are enabled. This is the default setting.
Manage and Maintain the Access
Point
186 User Manual