Manage The Syslog Settings - NETGEAR WAC510 User Manual

Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
Your settings are saved. When the access point connects over the Internet to an NTP
server, the date and time that display on the page are adjusted according to your
settings.
For information about other time settings, see Specify a custom NTP server on page
166.

Manage the syslog settings

If a syslog server is present on your network, you can configure the access point to send
its system logs to the syslog server.
To manage the syslog settings and enable the syslog function:
1. Open a web browser from a computer that is connected to the same network as the
access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
If your browser does not open the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 41.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight app or Insight Cloud portal, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight App on an iOS or Android mobile device on page
26).
The Dashboard page displays.
4. Select Management > Configuration > System > Advanced > Syslog.
Manage and Maintain the Access
Point
169 User Manual