NETGEAR WAC510 User Manual page 191

Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
• IP Settings Information pane. The IP Settings Information pane is in the center
of the Dashboard page (if the page width on your device is sufficient; otherwise,
it might be elsewhere) and displays the following:
- IP address of the access point and its DHCP status
- Gateway IP address
- Gateway status
- Wired traffic volume
5. To view more detailed information, select Management > Monitoring > System.
The page shows four sections:
• System Information section. The following settings are displayed:
- System Name. The access point NetBIOS name.
- System Mode. The access point system mode (AP or Router).
-
Wan MAC Address. The MAC address of the WAN Ethernet port of the access
point.
-
Lan MAC Address. The MAC address of the LAN Ethernet port of the access
point.
-
Wireless MAC Address for 2.4 GHz. The MAC address of 2.4 GHz WiFi
interface (radio) of the access point.
-
Wireless MAC Address for 5 GHz. The MAC address of 5 GHz WiFi interface
(radio) of the access point.
- Ethernet LLDP. The status of Ethernet LLDP feature (Enabled or Disabled).
-
LLDP Neighbour. The name of the LLDP neighbour, if any.
Monitor the Access Point and the
Network
191 User Manual