NETGEAR WAC510 User Manual page 190

Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
(If the page width on your device is narrow, these panes might be located elsewhere
on the Dashboard.)
• Connection Status Information pane. The Connection Status Information pane
is in the top, left corner of the Dashboard (if the page width on your device is
sufficient; otherwise, it might be elsewhere) and displays the following:
- Status of the connection to the NETGEAR Insight cloud-based management
platform, if any.
-
Status of the Internet connection.
- Functioning mode of the access point
- Number of clients connected to the access point.
• System Information pane. The System Information pane is in the center at the
top of the Dashboard (if the page width on your device is sufficient; otherwise,
it might be elsewhere) and displays the following:
- System name of the access point and country or region of operation.
- Ethernet MAC address.
- The serial number.
- Device uptime.
- Firmware version.
- The date and time that the access point itself or someone manually last
checked if new firmware was available.
This pane also contains a button that you can click to check for firmware updates
for the access point (see Check for new firmware and upgrade the access point
on page 170).
Monitor the Access Point and the
Network
190 User Manual