NETGEAR WAC510 User Manual page 229

Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
Table 3. Factory default settings (Continued)
Feature
Security
RF channel
WLAN settings for an individual WiFi network (SSID or VAP)
WiFi communication
Client isolation
Broadcast SSID
Band steering
VLAN ID (for WiFi clients)
Network authentication
Data encryption
Passphrase
802.11w (PMF)
URL tracking
MAC ACL
Rate limit
Captive portal
Basic WiFi settings for all WiFi networks (SSIDs or VAPs)
Radios
WiFi mode
MCS index / data rate
Channel width
Output power
Guard interval
Channel
WiFi schedule
Factory Default Settings and
Technical Specifications
Default Setting
WPA2 Personal (which is WPA2-PSK)
WiFi password (network key): sharedsecret
Auto. The available channels depend on the region.
Both the 2.4 GHz radio and the 5 GHz radio are enabled.
Disabled
Enabled
Disabled
Automatic band steering includes automatic 802.11k RRM and automatic 802.11v
WiFi network management.
1
WPA2 Personal (which is WPA2-PSK)
AES
sharedsecret
Disabled
Disabled
None assigned
None
None
Both the 2.4 GHz radio and the 5 GHz radio are enabled.
2.4 GHz radio: 11ng mode, which also supports 11b and 11bg
5 GHz radio: 11ac mode, which also support 11a and 11na
Best
Dynamic 20 / 40 MHz for the 2.4 GHz radio
Dynamic 20 / 40 / 80 MHz for the 5 GHz radio
Maximum (100%)
Auto
Auto
None
229 User Manual