NETGEAR WAC510 User Manual page 156

Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
162). If it is, the default DHCP server of the access point is enabled and you can also add
up to seven additional DHCP servers for WiFi clients only.
You can remove a DHCP server that you no longer need.
To remove a DHCP server:
1. Open a web browser from a computer that is connected to the same network as the
access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
If your browser does not open the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 41.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight app or Insight Cloud portal, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight App on an iOS or Android mobile device on page
26).
The Dashboard page displays.
4. Select Management > Configuration > IP > LAN > DHCP Server Settings.
5. Click the > button to the left the DHCP server.
The settings for the selected DHCP server display.
6. Click the Delete button.
A pop-up warning window opens.
7. Click the Delete button.
The pop-up window closes and the DHCP server is removed.
Manage the Local Area Network
and IP Settings
156 User Manual