Remove A User Account; Manage Neighbor Ap Detection - NETGEAR WAC510 User Manual

Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual

Remove a user account

You can remove a user account that you no longer need. You cannot remove the default
admin user account.
To remove a user account:
1. Open a web browser from a computer that is connected to the same network as the
access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
If your browser does not open the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 41.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight app or Insight Cloud portal, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight App on an iOS or Android mobile device on page
26).
The Dashboard page displays.
4. Select Management > Configuration > System > Advanced > User Accounts.
The existing user accounts display.
5. Click the X to the right of the user account.
A pop-up warning window opens.
6. Click the Delete button.
The pop-up windows closes and the user account is removed.

Manage neighbor AP detection

The access point can detect neighbor access points (APs) and you can classify them as
known APs.
Manage Access and Security 120 User Manual