Honeywell HVAC232 Series Applications Manual page 91

Code Parameter
P18.3 Fire mode:
frequency preset
P18.4 Fire mode activation:
close
P18.5 Fire mode activation:
open
P18.6 Fire mode:
reverse
Application manual HVAC232/402 | Document 27-652 | Issue ENG06 | 2019-08-07
Table 38. Fire mode.
Min Max Unit Default
P3.1 P3.2 Hz 8.00
0 Varies
0 Varies
0 Varies
ID Note
1598 Fire mode frequency preset
NOTE! This parameter will be locked when password for
fire mode is activated (not in the test mode), and not
only when fire mode input is set. To change the parame-
ter you have to disable fire mode.
6 1619 Digital input, if fire mode is enable or in test mode then when
digital input is closed, fire mode will be active.
As parameter 5.1
NOTE! This parameter will be locked when password for
fire mode is activated (not in the test mode), and not
only when fire mode input is set. To change the parame-
ter you have to disable fire mode.
0 1596 Digital input, if fire mode is enable or in test mode then when
digital input is open, fire mode will be active.
As parameter 5.1
NOTE! This parameter will be locked when password for
fire mode is activated (not in the test mode), and not
only when fire mode input is set. To change the parame-
ter you have to disable fire mode.
0 1618 Reverse command of rotation direction while running in fire
mode. This DI has no effect in normal operation.
As parameter 5.1
NOTE! This parameter will be locked when password for
fire mode is activated (not in the test mode), and not
only when fire mode input is set. To change the parame-
ter you have to disable fire mode.
91