Honeywell HVAC232 Series Applications Manual page 75

9.1.8 Analogue outputs (Control panel: Menu PAR
Code Parameter
P8.1 Analogue output signal
selection
P8.2 Analogue output minimum
P8.3 Analogue output scaling
P8.4 Analogue output filter time
P8.5 Analogue output E1 -
signal selection
P8.6 Analogue output E1 -
minimum
P8.7 Analogue output E1 -
scaling
P8.8 Analogue output E1 -
filter time
Application manual HVAC232/402 | Document 27-652 | Issue ENG06 | 2019-08-07
P8)

Table 29. Analogue outputs.
Min Max Unit
0 14
0 1
0,0 1000,0 %
0,00 10,00 s
0 14
0 1
0,0 1000,0 %
0,00 10,00 s
Default ID Note
0 = Not used
1 307
1 = Output freq. (0...f
2 = Output current (0...InMotor)
3 = Motor torque (0...T
4 = PID output (0...100%)
5 = Freq. refer. (0...f
6 = Motor speed (0...n
7 = Motor power (0...P
8 = Motor Voltage (0...U
9 = DC-link Voltage (0...1 000 V)
10 = Process Data In1 (0...10 000)
11 = Process Data In2 (0...10 000)
12 = Process Data In3 (0...10 000)
13 = Process Data In4 (0...10 000)
14 = Test 100%
0 310 0 = 0 V / 0 mA
1 = 2 V / 4 mA
100,0 311
0,10 308
0 472 As parameter P8.1,
hidden until an option board is connected
0 475 As parameter P8.2,
hidden until an option board is connected
100,0 476 As parameter P8.3,
hidden until an option board is connected
0,10 473 As parameter P8.4,
hidden until an option board is connected
)
max
)
nMotor
)
max
)
max
)
nMotor
)
nMotor
75