Honeywell HVAC232 Series Applications Manual page 73

9.1.7 Digital outputs (Control panel: Menu PAR  P7)
Code Parameter
P7.1 RO1 signal selection
P7.2 RO2 signal selection
P7.3 DO1 signal selection
P7.4 RO2 inversion
P7.5 RO2 ON delay
Application manual HVAC232/402 | Document 27-652 | Issue ENG06 | 2019-08-07
Table 28. Digital outputs.
Min Max Unit
0 Varies
0 Varies
0 Varies
0 1
0,00 320,00 s
Default ID Note
2 313 0 = Not used
1 = Ready
2 = Run
3 = Fault
4 = Fault Inverted
5 = Warning
6 = Reversed
7 = At Speed
8 = Motor regulator active
9 = FB Control Word.B13
10 = FB Control Word.B14
11 = FB Control Word.B15
12 = Output freq superv.
13 = Output torque superv.
14 = Unit temperature superv.
15 = Analogue input superv.
16 = Preset Speed Active
17 = External Brake ctrl
18 = Keypad control active
19 = I/O control active
20 = fire mode
21 = temperature supervision
3 314 As parameter 7.1
1 312 As parameter 7.1
0 1588 0 = No inversion
1 = Inverted
0,00 460
73