Honeywell HVAC232 Series Applications Manual page 59

Code Parameter
P18.2 Fire mode frequency select
P18.3 Fire mode frequency preset
P18.4 Fire mode activation close
P18.5 Fire mode activation open
P18.6 Fire mode reverse
Application manual HVAC232/402 | Document 27-652 | Issue ENG06 | 2019-08-07
Table 21. Quick setup parameters.
Min Max Unit
0 Varies
P3.1 P3.2 Hz
0 Varies
0 Varies
0 Varies
Default ID
0 1617 Fire mode frequency preset
NOTE! This parameter will be locked
when fire mode is active. To change
the parameter you have to disable fire
mode.
8,00 1598 Fire mode frequency preset
NOTE! This parameter will be locked
when fire mode is active. To change
the parameter you have to disable fire
mode.
6 1619 Digital input normal close
As parameter 5.1
NOTE! This parameter will be locked
when fire mode is active. To change
the parameter you have to disable
fire mode.
0 1596 Digital input normal open
As parameter 5.1
NOTE! This parameter will be locked
when fire mode is active. To change
the parameter you have to disable
fire mode.
0 1618 Reverse command of rotation direction
while running in fire mode. This DI has
no effect in normal operation.
As parameter 5.1
NOTE! This parameter will be locked
when fire mode is active. To change
the parameter you have to disable
fire mode.
Note
59