Honeywell HVAC232 Series Applications Manual page 85

9.1.14 PID control parameters (Control panel: Menu PAR
Code Parameter
P14.1 Setpoint source selection
P14.2 Fixed setpoint 1
P14.3 Fixed setpoint 2
P14.4 Feedback source selection
P14.5 Feedback value minumum
P14.6 Feedback value maximum
Application manual HVAC232/402 | Document 27-652 | Issue ENG06 | 2019-08-07

Table 35. PID control parameters.
Min Max Unit Default
0 Varies
0,0 100,0
0,0 100,0
0 Varies
0,0 50,0 %
10,0 300,0 %
P14)
ID Note
0 = Fixed setpoint %
0 332
1 = AI1
2 = AI2
3 = ProcessDataIn1 (0 -100%)
4 = ProcessDataIn2 (0 -100%)
5 = ProcessDataIn3 (0 -100%)
6 = ProcessDataIn4 (0 -100%)
7 = AIE1
8 = Temperature input 1
9 = Temperature input 2
10 = Temperature input 3
50,0 167 Fixed setpoint
50,0 168 Alternative fixed setpoint, selectable with DI
1 334 0 = AI1
1 = AI2
2 = ProcessDataIn1 (0 -100%)
3 = ProcessDataIn2 (0 -100%)
4 = ProcessDataIn3 (0 -100%)
5 = ProcessDataIn4 (0 -100%)
6 = AI2-AI1
7 = AIE1
8 = Temperature input 1
9 = Temperature input 2
10 = Temperature input 3
0,0 336 Value at minimum signal
100,0 337 Value at maximum signal
85