Emergency Procedures - GE SE 250 Mighty Small II Operating Instructions Manual

2 Safety information

2.3 Emergency procedures

2.3

Emergency procedures

Introduction
This section describes how to shut down of the SE 250/260 Mighty Small II in an emer-
gency situation, and the procedure for restarting the SE 250/260 Mighty Small II.
The section also describes the result in the event of power failure.
Precautions
Emergency shutdown
In an emergency situation, shut down the power supply in accordance with its emergency
procedure.
Power failure
In case of power failure to the SE 250/260 Mighty Small II, the run is interrupted immedi-
ately.
Restart after emergency
shutdown or power failure
To restart the run after an emergency shutdown or power failure, follow these steps:
Step
1
2
22
WARNING
Make sure that there is access to the instrument power supply cord
at all times.
Action
Make sure all connections are in place.
Start the power supply as described in the power supply's User Manual.
SE 250/260 Mighty Small II Operating Instructions 29281629 AA