Emergency Procedures - GE ÄKTA pure Operating Instructions Manual

2 Safety instructions

2.3 Emergency procedures

2.3

Emergency procedures

Introduction
This section describes how to perform an emergency shutdown of the ÄKTA pure instru-
ment, including connected equipment. This section also describes the results in the event
of power failure or network interruption.
Emergency shutdown
In an emergency situation, stop the run by either pausing the run or switching off the
instrument as described below:
If you want
to...
pause the run
26
then...
press the Pause button on the Instrument control panel:
•
Note:
The buttons on the Instrument control panel may be locked. This
is an option available in the System settings.
or
click the Pause icon in UNICORN™:
•
Result: All pumps in the instrument are stopped.
ÄKTA pure Operating Instructions 29-0229-97 AE