GE SE 250 Mighty Small II Operating Instructions Manual page 30

5 Operation
In this chapter
Section
5.1 Preparations
5.2 Assembly
5.3 Electrophoresis run
30
CAUTION
Circulate only water or 50/50 water/ethylene glycol through the
heat exchanger. Never use anti-freeze or any organic solvent in
the heat exchanger.
CAUTION
Devices must only be operated with a certified power supply capa-
ble of limiting the voltage and current to specified ratings.
NOTICE
After initial monitoring, do not leave the unit unattended for more
than 45 min before checking the progress of the bands and the
buffer level.
NOTICE
If running only one gel, block off the unused part of the core with
a glass plate. Do not fill this side with buffer.
SE 250/260 Mighty Small II Operating Instructions 29281629 AA
See page
31
34
40