GE SE 250 Mighty Small II Operating Instructions Manual page 41

Step
3
4
5
6
7
SE 250/260 Mighty Small II Operating Instructions 29281629 AA
Action
Remove the core assembly with gels attached by squeezing the release tabs
and lift out the core assembly.
Pour out the buffer by inverting the core assembly, then remove both clamps,
and lift away gel sandwich(es) from the upper buffer chamber core.
Gently loosen and then slide away both spacers.
Slip an extra spacer or a Wonder Wedge into the bottom edge (to prevent
breaking the ears of the notched plates) and separate the plates. The gel
usually adheres to the alumina plate.
Carefully lift the gel from the plate and lay it into a tray of stain or fixative.
5 Operation
5.3 Electrophoresis run
41