Cisco ASA Series Cli Configuration Manual page 79

Chapter 1 Introduction to the Cisco ASA
Table 1-5 New Features for ASA Version 9.0(1)/ASDM Version 7.0(1) (continued)
Feature
NAT support for IPv6
DHCPv6 relay
Description
NAT now supports IPv6 traffic, as well as translating between IPv4 and IPv6
(NAT64). Translating between IPv4 and IPv6 is not supported in transparent
mode.
We modified the following commands: nat (in global and object network
configuration mode), show conn, show nat, show nat pool, show xlate.
We modified the following screens:
Configuration > Firewall > Objects > Network Objects/Group
Configuration > Firewall > NAT Rules
DHCP relay is supported for IPv6.
We introduced the following commands: ipv6 dhcprelay server, ipv6
dhcprelay enable, ipv6 dhcprelay timeout, clear config ipv6 dhcprelay,
ipv6 nd managed-config-flag, ipv6 nd other-config-flag, debug ipv6 dhcp,
debug ipv6 dhcprelay, show ipv6 dhcprelay binding, clear ipv6 dhcprelay
binding, show ipv6 dhcprelay statistics, and clear ipv6 dhcprelay statistics.
We modified the following screen: Configuration > Device Management >
DHCP > DHCP Relay.
Cisco ASA Series CLI Configuration Guide
New Features
1-17