Cisco ASA Series Cli Configuration Manual page 237

Chapter 1 Configuring Multiple Context Mode
Detailed Steps
Command
Step 1
copy disk0:old_running.cfg startup-config
Example:
hostname(config)# copy
disk0:old_running.cfg startup-config
Step 2
mode single
Example:
hostname(config)# mode single
Configuring a Class for Resource Management
To configure a class in the system configuration, perform the following steps. You can change the value
of a particular resource limit by reentering the command with a new value.
Prerequisites
Perform this procedure in the system execution space.
Guidelines
Table 1-1 lists the resource types and the limits. See also the show resource types command.
Purpose
Copies the backup version of your original running configuration
to the current startup configuration.
Sets the mode to single mode. You are prompted to reboot the
ASA.
Cisco ASA Series CLI Configuration Guide
Configuring Multiple Contexts
1-17