Ground Lug Kit Slide Rail Kit Note: The ASA 5585-X with SSP-10, SSP-20, or SSP-40 ships with one power supply module installed and one power cable. The ASA 5585-X with SSP-60, ships with two power supply modules installed and two power cables.
Page 2
Cisco ASA 5585-X Quick Start Guide 3. Network Considerations for Multiple SSPs Cisco ASA 1200W AC Cisco ASA 1200W AC 100-240V 100-240V 15.0/8.0.A 15.0/8.0.A 56/60Hz 56/60Hz Power Supply Module (PS0) Power Supply Module (PS1) Connect the power cables to the electrical outlets.
Page 3
Cisco ASA 5585-X Quick Start Guide 4. Connect Interface Cables and Verify Connectivity Slot 0 Module Management Default IP Slot 1 Module Management Default IP Interface ID address Interface ID address ASA SSP Management 0/0 192.168.1.1 ASA SSP Management 0/0 192.168.1.1...
Page 4
In the Address field, enter the following URL: https://192.168.1.1/admin. The Cisco ASDM web page appears. Click one of the available options: Install ASDM Launcher, Run ASDM, or Run Startup Wizard. Follow the onscreen instructions to launch ASDM according to the option you chose. The Cisco ASDM-IDM Launcher appears. Note:...
Page 5
Documentation. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners.
Page 6
Cisco ASA 5585-X Quick Start Guide 6. Run ASDM Wizards and Advanced Configuration...