Cisco ASA Series Cli Configuration Manual page 678

Additional References
Command
show ipv6 ospf [process-id] [area-id]
interface [type number] [brief]
show ipv6 ospf neighbor [process-id]
[area-id] [interface-type interface-number]
[neighbor-id] [detail]
show ipv6 ospf [process-id] [area-id]
request-list [neighbor] [interface]
[interface-neighbor]
show ipv6 ospf [process-id] [area-id]
retransmission-list [neighbor] [interface]
[interface-neighbor]
show ipv6 ospf statistic [process-id]
[detail]
show ipv6 ospf [process-id] summary-prefix
show ipv6 ospf [process-id] timers
[lsa-group | rate-limit]
show ipv6 ospf [process-id] traffic
[interface_name]
show ipv6 ospf virtual-links
show ipv6 route cluster [failover]
[cluster] [interface] [ospf] [summary]
Additional References
For additional information related to implementing OSPF, see the following section:
•
RFCs
RFC
2328
4552
5340
Cisco ASA Series CLI Configuration Guide
1-46
RFCs
Purpose
Displays OSPFv3-related interface information.
Displays OSPFv3 neighbor information on a
per-interface basis.
Displays a list of all LSAs requested by a router.
Displays a list of all LSAs waiting to be resent.
Displays various OSPFv3 statistics.
Displays a list of all summary address
redistribution information configured under an
OSPFv3 process.
Displays OSPFv3 timers information.
Displays OSPFv3 traffic-related statistics.
Displays OSPFv3-related virtual links
information.
Displays the IPv6 routing table sequence number,
IPv6 reconvergence timer status, and IPv6 routing
entries sequence number in a cluster.
Title
OSPFv2
OSPFv3 Authentication
OSPF for IPv6
Chapter 1 Configuring OSPF