Starting Asdm - Cisco ASA Series Cli Configuration Manual

Software version 9.0 for the services module
Hide thumbs Also See for ASA Series:
Table of Contents

Advertisement

Starting ASDM

dhcpd address 192.168.1.3-192.168.1.254 inside
dhcpd enable inside
http server enable
http 192.168.1.0 255.255.255.0 inside
Starting ASDM
You can start ASDM using two methods:
Note
Within ASDM, you can choose a different ASA IP address to manage; the difference between the
Launcher and Java Web Start application functionality rests primarily in how you initially connect to the
ASA and launch ASDM.
This section describes how to connect to ASDM initially, and then launch ASDM using the Launcher or
the Java Web Start application. This section includes the following topics:
Note
ASDM allows multiple PCs or workstations to each have one browser session open with the same ASA
software. A single ASA can support up to five concurrent ASDM sessions in single, routed mode. Only
one session per browser per PC or workstation is supported for a specified ASA. In multiple context
mode, five concurrent ASDM sessions are supported per context, up to a maximum of 32 total connections
for each ASA.
Connecting to ASDM for the First Time
To connect to ASDM for the first time to download the ASDM-IDM Launcher or Java Web Start
application, perform the following steps:
Step 1
From a supported web browser on the ASA network, enter the following URL:
https://interface_ip_address/admin
Where interface_ip_address is the management IP address of the ASA. See the
Access for Appliances" section on page 1-6
ASA Services Module" section on page 1-11
Cisco ASA Series CLI Configuration Guide
1-14
security-level 100
ASDM-IDM Launcher—The Launcher is an application downloaded from the ASA using a web
browser that you can use to connect to any ASA IP address. You do not need to re-download the
launcher if you want to connect to other ASAs. The Launcher also lets you run a virtual ASDM in
Demo mode using files downloaded locally.
Java Web Start—For each ASA that you manage, you need to connect with a web browser and then
save or launch the Java Web Start application. You can optionally save the application to your PC;
however you need separate applications for each ASA IP address.
Connecting to ASDM for the First Time, page 1-14
Starting ASDM from the ASDM-IDM Launcher, page 1-15
Starting ASDM from the Java Web Start Application, page 1-16
Using ASDM in Demo Mode, page 1-16
or the
"Configuring ASDM Access for the
for more information about management access.
Chapter 1
Getting Started
"Configuring ASDM

Advertisement

Table of Contents
loading

Table of Contents