Cisco ASA Series Cli Configuration Manual page 583

Chapter 1 Adding a Standard Access Control List
The following example shows how to permit IP traffic through the ASA if conditions are matched:
hostname(config)# access-list 77 standard permit
The following example shows how to specify a destination address:
hostname(config)# access-list 77 standard permit host 10.1.10.123
Feature History for Standard Access Lists
Table 1-2
Table 1-2 Feature History for Standard Access Lists
Feature Name
Standard access lists
lists the release history for this feature.
Releases
7.0(1)
Feature History for Standard Access Lists
Feature Information
Standard access listsidentify the destination IP addresses of
OSPF routes, which can be used in a route map for OSPF
redistribution.
We introduced the feature and the following command:
access-list standard.
Cisco ASA Series CLI Configuration Guide
1-5