Cisco ASA Series Cli Configuration Manual page 712

Feature History for RIP
Feature History for RIP
Table 1-1
Table 1-1 Feature History for RIP
Feature Name
RIP support
Clustering
Cisco ASA Series CLI Configuration Guide
1-12
lists each feature change and the platform release in which it was implemented.
Releases
7.0(1)
9.0(1)
Feature Information
Support was added for routing data, performing
authentication, and redistributing and monitoring routing
information using the Routing Information Protocol (RIP).
We introduced the route rip command.
For RIP, bulk synchronization, route synchronization, and
layer 2 load balancing are supported in the clustering
environment.
We introduced or modified the following commands: show
route cluster, debug route cluster, show mfib cluster,
debug mfib cluster.
Chapter 1 Configuring RIP