Mechanical Installation; Installation Of Three-Phase Inverters - AEG AS-IC01-2 Series Installation Instructions Manual

21

3.3 Mechanical installation

As the installation place and materials the inverter is installed on may vary, the AEG inverter can be installed by different
mounting methods. It is recommended to install the inverter vertically to firm wall or metal bracket. Taking the typical
installation environment as example, the manual describes how to install the inverter on concrete wall.
The inverter installation should be vertical to the horizontal surface.

3.3.1 Installation of three-phase inverters

AS-IC01-12000-2 / AS-IC01-15000-2 /
AS-IC01-17000-2 / AS-IC01-20000-2 /
AS-IC01-25000-2 / AS-IC01-30000-2
Please follow the below installation steps for three-phase inverters AS-IC01-2 up to 30 kW:
1. Put the installation bracket cutout template against the wall;
2. Drill into the wall according to the marked holes.
PD201808 AEG GRID-TIED THREE-PHASE SOLAR INVERTER (12-30 kW) V.2-18 EN
Model
Table 11: Installation brackets specifications
Figure 11A: Mark the hole position
Figure 10: Installation bracket
A (mm)
400
Installation hole
B (mm)
400
Figure 11B: Drill into the marked holes
21