Honeywell ISA100 Gen X User Manual page 46

The Sensor is also expected to transmit the alarms if any, and also notify the change in state
of alarm using ISA100_ADD_UAP_ALARM
The system manager can request for an alarm re-generation using
ISA100_NOTIFY_ALARM_REGEN_BEGIN if necessary, and the Sensor is expected to send
all the active alarms. When all the alarm information is sent, it has to send an alarm
regeneration end message, ISA100_NOTIFY_ALARM_REGEN_END.
46
Release Independent
ISA100 Gen X Radio Module User's Guide
April 2018
Honeywell